APC STANDARD POWER BAR P7T10
Regular Stock. Please contact our sales at 780-481-8855 to get current availability. Holds limited to 24 hours maximum.
APC Essential SurgeArrest, 7 outlet, phone line protection, 10 ft power cord
Basic Protection Against Power Surges for Computers and Electronics
Includes: 1.8 Meter Tel Cable (2), User Manual
- Manual disconnect switch
Enables the surge supressor to be de-energized for service without disconnecting the protected load.
- Transformer Block Spacing
Connect bulky transformer block plugs without covering up other outlets.
SurgeArrest Essential Features & Benefits
Protection of data lines (Ethernet, Coaxial and Phone lines) ensures complete protection of your equipment from surges. It is very important to protect your equipment from “back door” electric surges traveling through data lines, as they can be as damaging to your equipment as surges traveling over power lines.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Attenuates EMI/RFI line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.
Lightning and Surge Protection
To prevent damage to your equipment from electric power surges and spikes.
IEEE let-through ratings and regulatory agency compliance
APC surge protectors undergo stringent testing by IEEE, and are awarded “let-through ratings”, which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through an electric surge protector. Lower IEEE let-through ratings indicate better protection and performance. The APC Essential SurgeArrest series offers optimal performance with a let-through rating of less than 330V to 500V for North American products, and a rating of less than 15% for products sold worldwide. All APC products comply with local agency safety requirements, including UL in North America and CE/Kema/Gost/C-tick/A-Tick/Telepermit in their respective regions.
Catastrophic Event Protection
SurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.
Fail Safe Mode
Most other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC’s SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.
Building Wiring Fault Indicator
This LED informs users of potentially dangerous wiring problems in the wall circuit.
Protection Working Indicator
SurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.
Number of Outlets
Nominal Input Voltage
50/60 Hz +/- 5 Hz (manual switch)
Number of Power Cords
Maximum Line Current
Surge Protection and Filtering
Surge energy rating
Data Line Protection
RJ-11 Modem/Fax/DSL protection (two wire single line)
Data Lines Protected
Peak Current Common Mode
Peak Current Normal Mode
14.0inches (356MM, 35.6CM)
3.0inches (76MM, 7.6CM)
2.0inches (51MM, 5.1CM)
14.0inches (356MM, 35.6CM)
5.26inches (133MM, 13.3CM)
1.88inches (48MM, 4.8CM)
Master Carton Dimensions (Length x Width x Height)
16.37 x 15.5 x 8.13inches (416 x 394 x 207MM)
Master Carton Units
Master Carton Weight
Units per Pallet
32 – 104 °F (0 – 40 °C)
Operating Relative Humidity
0 – 95 %
-15 – 45 °C
Storage Relative Humidity
0 – 95 %
|Dimensions||5 × 5 × 5 in|