Description
DESCRIPTION
HyperX HX432C16FB3/8 is a 1G x 64-bit (8GB) DDR4-3200 CL16
SDRAM (Synchronous DRAM) 1Rx8, memory module, based on
eight 1G x 8-bit FBGA components per module. Each module kit
supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each
module has been tested to run at DDR4-3200 at a low latency timing
of 16-18-18 at 1.35V. The SPDs are programmed to JEDEC
standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each
288-pin DIMM uses gold contact fingers. The JEDEC standard
electrical and mechanical specifications are as follows:
FACTORY TIMING PARAMETERS
• Default (JEDEC): DDR4-2400 CL17-17-17 @1.2V
• XMP Profile #1: DDR4-3200 CL16-18-18 @1.35V
• XMP Profile #2: DDR4-3000 CL15-17-17 @1.35V
FEATURES
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.3425” (34.1mm), w/heatsink
Brand Name: | HyperX |
Product Line: | Fury |
Product Name: | Fury 8GB DDR4 SDRAM Memory Module |
Product Type: | RAM Module |
Technical Information | |
Memory Size: | 8 GB |
Memory Technology: | DDR4 SDRAM |
Memory Voltage: | 1.35 V |
Number of Modules: | 1 x 8 GB |
Memory Speed: | 3200 MHz |
Memory Standard: | DDR4-3200/PC4-25600 |
Error Checking: | Non-ECC |
Signal Processing: | Unbuffered |
CAS Latency: | CL16 |
Physical Characteristics | |
Number of Pins: | 288-pin |
Form Factor: | DIMM |
Thickness: | 0.28″ (7.20 mm) |
Width: | 1.34″ (34.10 mm) |
Length: | 5.25″ (133.35 mm) |